Soil humidity sensor IP67 Zigbee

Wireless soil temperature and humidity sensor for the TUYA application.

Use the device in combination with, for example, a valve controller available in our offer. Offer number: 13781238701. Thanks to this connection, when too little soil moisture is detected, it will turn on watering. The device can also be used as a reminder to manually water flowers at home.

Main advantages:

The device measures soil moisture and temperature at depth rods measuring devices.

It has an IP67 protection level, so it can be used in a garden or greenhouse.

It can be used in combination with watering/valve controllers using automation. Offer number: 13781238701

Setting temperature units in the application.

Data is visible in the application currently and historically on the chart.

Thanks to ZigBee communication, the device can operate longer on batteries (up to 12 months depending on use).

High precision of temperature and humidity measurement.

ATTENTION! For proper operation of the device, an additional ZigBee gateway is needed, available in our offer.

Precise measurement

The device allows you to ensure proper hydration and prevent the soil from drying out or freezing. This will allow you to enjoy a beautiful and healthy garden or flowers at home without wasting water. Application

The device can be used in the garden, on the terrace, on the balcony or at home. Data sent to TUYA

View real-time and historical temperature and humidity data on a graph in the app. Possibility of implementing automation with e.g. watering or valve controllers using this device. Basics of the ZigBee protocol:

The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings.

ZigBee communications is a connection news ... MESH which means that each ZigBee device with full L+N power works as a signal amplifier for other devices. If the remote sensor has no connection with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power, which has communication with the gateway (up to 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection

Devices using the ZigBee protocol in the event of a change state, they connect to the control panel in 0.2 seconds, and WiFi need about 5 seconds to connect to the network after the state change. ZigBee devices have a huge advantage when it comes to automating smart rules

On a WiFi network, with 25 devices, you will start to experience network problems. You can easily add over 50 devices to the ZigBee switchboard

The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved for months back

ZigBee communication uses very little energy, which gives a long battery life.

IP67 protection

The sensor is dustproof and waterproof, so it will not be damaged by rain, snow, dust or mud. The sensor probe is made of high corrosion-resistant steel - so you can leave it in the soil for long months without worrying about accurate measurements and long service life. ‡. Specifications:

Power supply: 2 x AA batteries (not included)

Battery life: up to 12 months

Humidity measurement ranges: 0-100%

Humidity accuracy: 0-50 %(± 3%), 50%-100%(± 5%)

Temperature measurement ranges: -20 ℃ to 60 ℃

Temperature accuracy: 1 ℃

Communication: ZigBee

Response time to application data: 60s

Protection level: IP67

Item size: 180 x 46.5 mm

Included:

Soil temperature and humidity sensor

Instruction

Product code: T120