Thermostat SPLIT 16A/Normally Open White PS Wifi TUYA

Wireless Thermostat for home heating and building automation applications.

This is a set consisting of a temperature controller with an LCD screen powered by battery or USB and a TUYA WiFi controller receiver powered by 230V AC (Central control unit wirelessly connected to the temperature controller device). The central unit and the temperature controller with LCD screen connect to each other via an RF radio connection, and the central unit connects to WiFi and the TUYA application. A great convenience is that the regulator does not require a typical connection to the electrical installation, because it can be battery-powered and hung on the wall or placed on a table/cabinet.

Wireless Thermostat for home heating and building automation applications.

The thermostat can be connected as a normally open device ( for a furnace, boiler) or loadable (16A)

Main features of the product:

wireless, radio connection between the regulator and the receiver, range up to 30 m in open space,

manual control of the regulator and free TUYA application for IOS or Android,

two main operating modes : manual and programmable,

possibility of operation via remote control via the wireless WiFi network in the TUYA application,

programmable mode with settings up to 6 time blocks per day,

Two programming modes - working days and weekends,

Temperature calibration,

Does not require connection to the Internet for operation,

Power supply of the regulator via batteries (2 x 1.5V AA), or via a USB power supply/MicroUSB cable

adjustment of the set temperature range,

hysteresis adjustment,

parental lock,

voice control - with devices compatible with these systems

Attention! Powering the display panel with batteries and a USB cable at the same time may damage the device - make sure you power the display with one or the other method!

Wireless control

In addition to basic control using the buttons on the device housing, the thermostat can be operated using the TUYA application, thanks to so the temperature can be changed from anywhere in the world.

Ideal for controlling the furnace

TS203 is a set consisting of a temperature controller and a receiver. The device is intended, among others, to control furnaces. The connection between the controller and the receiver is via radio. The controller can be powered by a USB cable or batteries.

Hysteresis adjustment

The device allows you to individually adjust the hysteresis value in the range from 1 to 5 °C (every 1°C)

Possibility to set up to 6 time blocks per day

Allows you to set it in the range of 24 hours up to 6 different time blocks that can be freely programmed at intervals you specify. Can be set for working days plus Saturday and Sunday.

Parental lock

Protect your device against uncontrolled interference by your child. You can be sure that the settings you set will change unexpectedly.

Connection diagram of the central unit

Technical specifications:

Power supply: USB / 2 x AA batteries (Not included)

Can be connected as a load or short circuit

Max current: 16A (loadable) , 3A (closed circuit)

Type: manually programmable from the panel, communication with the RF remote unit, WiFi

Operating modes: manual, programmable, holiday

Temperature regulation range (minimum): 5-15°C

Temperature regulation range (maximum): 15 -35°C

Sensor: NTC3950, 10K (not included)

Own consumption: ≤1.5W

Regulator sensor: air

Protection level: IP20

Receiver dimensions: 86 x 99 x 24.2 mm

Thermostat dimensions: 130 x 90 x 17.5 mm

Control panel material: plastic

The set includes:

WiFi thermostat (base + receiver)

MicroUSB power cable

Pins + mounting screws

Stand

User manual

Product code: TS203