Radiator rhermostat Zigbee

ZigBee thermostatic head Sonoff eWeLink

The latest generation ZigBee 3.0 protocol together with the eWeLink application allows you to create a truly intelligent home. After setting the correct schedules for each day of the week, you can forget about remembering to check the opening level of the heads every day.

Main advantages:

Menu and functions in Polish

Precise remote and automatic setting of the radiator temperature via using the smartphone application (eWeLink)

Automatic open window detection mode (the head detects an open window at a certain time, closes the valve, detecting airing the room)

Temperature reading and automation with other elements of the eWeLink ecosystem based on these values ci

Setting multiple heads into one group. Group settings in eco mode

Anti-freezing function

Child protection

Temperature calibration

Function - heating/not heating

Shows consumption forecast

Programming 7 days a week, 5 cycle changes per day

Possibility to copy the schedule for specific days

The head comes with 6 adapters

Full temperature and humidity statistics

The device is compatible with Home Assistant ZigBee2mqtt!

Voice control via Amazon Alexa or Google Assistant, only for devices compatible with these systems

Additionally, in the settings you can configure scenarios for the automation of other devices. Note! This device requires a ZigBee 3.0 Sonoff gateway available in our offer

Control of multiple rooms for the comfort of the entire home

The temperature in each room can be independently regulated and adapted to the needs of each family member this room Open window detection functions

Window opening sensors detect and signal the opening of a window in the room, thus preventing uncontrolled heat loss during airing. Anti-freezing function

In the off state connection, the head will automatically turn on the heating device when the room temperature drops below 5°C. Voice control will free your hands

With a simple command, you can set the ideal temperature in your room Basics of the ZigBee protocol:

The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings

ZigBee communication is awareness MESH cutting, which means that each ZigBee device with full L+N power works as a signal amplifier for other devices. If the remote sensor has no connection with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power, which has communication with the gateway (up to 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection

Devices using the ZigBee protocol in the event of a change state, they connect to the control panel in 0.2 seconds, and WiFi need about 5 seconds to connect to the network after the state change. ZigBee devices have a huge advantage when it comes to automating smart rules

On a WiFi network, with 25 devices, you will start to experience network problems. You can easily add over 50 devices to the ZigBee switchboard

The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved for months back

ZigBee communication uses very little energy, which gives a long battery life

Specification:

Protocol: ZigBee 3.0

Scope regulation: 4 - 35°C

Accuracy: 0.5°C

Power supply: battery, 3 x 1.5 V AA (not included)

Net weight: 154 g

Dimensions: 59.4 x 59.4 x 95 mm \ NMECE: M30 x 1.5 (6 adapters in the set) \ Powering: Ewelink \ nw set: \ ngłżów thermostatic zigbee Sonoff Ewelink \ n6.

Product code: GSZ01