Zigbee 3ch-9program remote controller

Remote control 3 channels 9 programs LR series ZigBee TUYA

Wireless, hand-held, surface-mounted ZigBee remote control

Despite having 3 buttons, the device can have up to 9 assigned automations. Each automation can be started with one press, two presses or long pressing of the button. The device runs on batteries (included), in normal use the battery should last for about 1-2 years. The button is made of high-quality plastic. After drying, the green LED lights up slightly. Attention! For proper operation of the device, a ZigBee 3.0 TUYA gateway is required, available in our offer.

The most important advantages:

Aesthetic appearance, can be placed anywhere in the house.

Simple interface for setting up automation with TUYA application.

3 different events can be defined for each button.

Multiple conditions (if) and events (then) assigned to one command.

Remote on/off - turning on and off turning off the lights from anywhere

Creating a sequence of events with one button.

Classic, elegant appearance, high quality of workmanship

LED backlight for confirmation of pressing a button

nAway mode

Turn off all lights before leaving home. With a double click, you can turn off all devices before leaving the apartment, while also turning on the alarm mode. There is a wall bracket in the box, so the TUYA ZigBee remote control can be mounted anywhere. You can define the button function in the TUYA application. With this remote control you can control any ZigBee devices and Wi-Fi devices in the TUYA app. The TUYA wireless ZigBee remote control can be mounted to a wall or other surface using: double-sided tape

attached screws

hang on a lanyard

The basics of the ZigBee protocol: Protocol Å ZigBee works on the 2.4 GHz frequency, which propagates well in buildings. ZigBee communications are MESH communications, which means that each ZigBee device is fully With the new L+N power supply, it acts as a signal amplifier for other devices. If the remote sensor has no connection with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power, which has communication with the gateway (up to 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection

Devices using the ZigBee protocol in the event of a change state, they connect to the control panel in 0.2 seconds, and WiFi need about 5 seconds to connect to the network after the state change. ZigBee devices have a huge advantage when it comes to automating smart rules

On a WiFi network, with 25 devices, you will start to experience network problems. You can easily add over 50 devices to the ZigBee switchboard

The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved for months.

ZigBee communication uses very little energy, which gives it a long battery life.

Specification: Color: white

Protocol ‚ wireless: TUYA ZigBee 3.0 (can only work with TUYA ZigBee hub, can't work with other brands hub)

Control distance: 10 meters around Tuya ZigBee hub

W dimensions: 90 mm * 30 mm * 13 mm

Battery type: CR2032 battery (included)

We have all the accessories you need in the box, you don't have to pay extra costs. Included: 1 * TUYA ZigBee Remote

1 * CR2032 Coin Battery (in Remote Control)

1 * Wall Bracket

1 * Lanyard

1 * Screwdriver

1 * Screw Sets

1 * Double-sided Tape

n1 * User manual

PRODUCT CODE: PNTZ63