Zigbee 4ch remote controller

Remote control 4 channels 12 programs LR series ZigBee TUYA

Wireless, hand-held, surface-mounted ZigBee remote control

Despite having 4 buttons, the device can have up to 12 assigned automations. Each automation can be started with one press, two presses or long pressing of the button. The device runs on batteries (included), in normal use the battery should last for about 1-2 years. The button is made of high-quality plastic. After drying, the green LED lights up slightly. Attention! This device requires a TUYA ZigBee 3.0 gateway available in our offer

The most important advantages:

Aesthetic appearance, can be placed anywhere in the house.

Simple interface for setting up automation from the TUYA application.

For each button you can define 3 different events.

Multiple conditions (if) and events (then) assigned to one command.

Remote on/off - turn on and off lights from anywhere

Create a sequence of events with one button.

Classic, elegant appearance, high quality of workmanship

LED backlight for confirmation of pressing

Absence mode

Off Switch on all lights before leaving the house. With a double click, you can turn off all devices before leaving the apartment, while also turning on the alarm mode. There is a wall bracket in the box, so the TUYA ZigBee remote control can be mounted anywhere. You can define the button function in the TUYA application. With this remote control you can control any ZigBee devices and Wi-Fi devices in the TUYA app. The TUYA wireless ZigBee remote control can be mounted to a wall or other surface using: double-sided tape

attached screws

hang on a lanyard

The basics of the ZigBee protocol: Protocol Å ZigBee works on the 2.4 GHz frequency, which propagates well in buildings. ZigBee communications are MESH communications, which means that each ZigBee device is fully With the new L+N power supply, it acts as a signal amplifier for other devices. If the remote sensor has no connection with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power, which has communication with the gateway (up to 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection

Devices using the ZigBee protocol in the event of a change status, they connect to the control panel in 0.2 seconds, and WiFi need about 5 seconds to connect to the network after the status change. ZigBee devices have a huge advantage when it comes to automating smart rules

On a WiFi network, with 25 devices, you will start to experience network problems. You can easily add over 50 devices to the ZigBee switchboard

The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved for months back

ZigBee communication uses very little energy, which gives it a long battery life.

Specification: Color: white

Protocol ‚ wireless: TUYA ZigBee 3.0 (can only work with TUYA ZigBee hub, can't work with other brands hub)

Control distance: 10 meters around Tuya ZigBee hub

W dimensions: 100 mm * 30 mm * 10 mm

Battery type: CR2032 battery (included)

We have all the accessories you need in the box, you don't have to pay extra costs. Included: 1 * TUYA ZigBee Remote Control

1 * CR2032 Coin Battery (in Remote Control)

1 * Wall Bracket

1 * Lanyard

1 * Screwdriver

1 * Screw Sets

1 * Double-sided Tape

n1 * User manual

PRODUCT CODE: PNTZ64