2CH DC 5-32V voltage-free ZigBee + RF controller

ZigBee DC driver for the Ewelink and TUYA applications or other applications supporting ZigBee 3.0

Power supply - 5V Micro USB or 7-32 V AC/DC with support for RF 433.92 MHz EV 1525 remote controls Fixed codes

RF 433.92 MHz remote controls sold separately. Look for our other offers.

Compatible with ZigBee 3.0 gateways - TUYA, eWelink, etc.

3 operating modes: monostable (pulse), bistable (self-locking), with time delay.

Application:

The switch is perfect for controlling lighting, gates, actuators, door control, button signaling, computer control, access control, voltage-free control - heating furnaces, control of 230 V devices.

Works with Google Home, Amazon Alexa through compatible gateways.

Connect it to your gate module in place of the manual button contacts and you have a smartphone-controlled garage door.

The device is intended to control other electronics and does not have a housing.

ATTENTION. Depending on the delivery, the appearance of the printed circuit board, relay or arrangement of elements on the board may differ.

Basics of the ZigBee protocol:

The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings

ZigBee connectivity is MESH connectivity, which means that each ZigBee device with full L+N power works as a signal amplifier for other devices. If a remote sensor does not have communication with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power that has communication with the gateway (up to a maximum of 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection

Devices using the ZigBee protocol connect to the control panel in 0.2 seconds in the event of a state change, and WiFi needs about 5 seconds to connect to the network after a state change. ZigBee devices have a huge advantage when it comes to automating smart rules

On a WiFi network with 25 devices you will start to experience network issues. You can easily add over 50 devices to the ZigBee hub

The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved months ago

ZigBee communication consumes very little energy, which gives a long battery life.

Specification:

Dimensions: 104x33x19 mm

Own power consumption: <1 W

Connectivity standard: ZigBee 3.0

Standby current: 80 mA

Receiver: RF433.92 MHz fixed codes EV1525

Input voltages: 5V DC or 5V/7-32V DC

LEDs that indicate the operating mode, WiFi status, on/off relay status

Operating conditions: -30°C to 75°C humidity less than 95%

Security mechanisms: WEP/WPA-PSK/WPA2-PSKNC: Normally closed relayCOM: CommonNO: Normally open

Set contains:

ZigBee+RF voltage-free 2CH DC Ewelink Tuya controller

User manual in Polish

Packaging

Product code: SZ168R