

(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
ZigBee DC controller
Power supply - 5V Micro USB or 7-32V AC/DC with support for RF 433.92 MHz EV1525 remote controls Fixed codes
RF 433.92 MHz remote controls sold separately. Look for our other offers. Compatible with ZigBee 3.0 gateways - TUYA, eWelink, etc. 3 operating modes: monostable (pulse), bistable (self-locking), with time delay. Application: The switch is perfect for controlling lighting, gates, actuators, door control, button signaling, computer control, access control, voltage-free control - heating furnaces, device control 230 V powered devices. Works with Google Home, Amazon Alexa, IFTTT via compatible gateways. Connect it to your gate module in place of the hand button contacts and you have a smartphone-controlled garage door. The device is intended to control other electronics and does not have a housing. ATTENTION. Depending on the delivery, the appearance of the printed circuit board, relay or arrangement of elements on the board may vary. Basics of the ZigBee protocol: The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings. ZigBee connectivity is beheaded MESH which means that each ZigBee device with full L+N power works as a signal amplifier for other devices. If the remote sensor has no connection with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power, which has communication with the gateway (up to 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection
Devices using the ZigBee protocol in the event of a change state, they connect to the control panel in 0.2 seconds, and WiFi need about 5 seconds to connect to the network after the state change. ZigBee devices have a huge advantage when it comes to automating smart rules
On a WiFi network, with 25 devices, you will start to experience network problems. You can easily add over 50 devices to the ZigBee switchboard
The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved for months.
ZigBee communication uses very little energy, which gives a long battery life.
Full support for TUYA and eWelink applications!
Connect this device with your TUYA or Sonoff ecosystem via appropriate ZigBee gateways.
Possibility to set a time loop and stopwatch in the application. After starting, the switch will automatically turn off ™ after a specified period of time.
Setting a schedule for many events per day.
Setting a time loop
Possibility to set automation rules in the TUYA or eWelink software. Create complex rules connecting a larger number of devices in the application.
Operating modes: Jog (default) - momentary mode Monostable, press the remote control button, the relay will turn on is it happening? Release the remote control button and the switch will turn off. A mode not supported by the application works monostably in the application - Impulse.
Self-locking - Bistable mode allows you to turn on devices that remain on until they are turned off …connected with another press of the remote control/application. Classic relay operation mode.
Relay
Relay operation diode
ZigBee module
RF pairing button / manual switch / settings switch
Mode change
Work diode
Micro USB 5 V/ 500 mA
Communication diode
3 mm
AC/DC input 7-32 V
RF 433 receiver
NC
COM
NO
Specification:
Dimensions: 71 x 41 x 18 mm
On reasonable power consumption:
Connectivity standard: ZigBee 3.0
Standby current: 80 mA
Receiver: RF 433.92 MHz fixed codes EV1525
Input voltages: 5 V DC or 5 V/7-32 V DC
Maximum load per relay: 10 A
LEDs that indicate the operating mode, WiFi status, relay on/off status
Operating conditions: -30°C to 75°C humidity less than 95%
Security mechanisms: WEP/WPA-PSK/WPA2-PSK'NC': Normally closed relay 'COM': Common 'NO': Normally open - normally open
The set includes :
DC 1CH ZigBee + RF 433 MHz controller
User manual in Polish
Packaging
Product code: SZ167R
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
check_circle
check_circle