4 in1 PIR, temp, humidity, lux sensor Zigbee

4in1 ZigBee TUYA multisensor

It is a versatile device that collects information on air humidity, light intensity, temperature and motion detection. These four functions allow you to fully automate your home. The device allows you to monitor four key parameters to create a comfortable and intelligent home.

It is perfect for the bathroom, monitoring all the most important parameters. Main advantages:

4 sensors in one device:

- PIR motion sensor - temperature sensor - humidity sensor - brightness sensor Data is provided currently and historically in the application

Time setting part notification settings (0 - 1440 minutes)

Setting the motion detection sensitivity (low, medium, high)

Setting the time after which, e.g., the light should turn off (0s) , 30s, 60s, 120s, 240s)

Possibility to turn off the PIR sensor

Possibility to calibrate the temperature, brightness and humidity values

Possibility ‡ turn off the diode on the device

The set includes a magnetic wall mount

Battery or USB powered

Detailed battery data available in the application

Aesthetic appearance and easy installation

Possibility to purchase a mounting bracket (ceiling) available in our offer!

ATTENTION! For proper operation of the product, an additional ZigBee gateway available in our offer is required.

Two power supply modes

This is a very convenient feature of the 4-in-1 sensor because it gives the user flexibility in choosing the power supply method. Regardless of whether you use batteries or a power cord, the sensor will continue to operate reliably. Thanks to this, you can adjust the power supply to your preferences, ensuring continuous and reliable operation of the device. Attention. Fast information refresh time should be used with a USB power connection. Please remember that if you set the refresh rate to be very frequent (less than 30 seconds), the battery consumes very quickly. Application

The sensor is a perfect solution for those who want to have intelligent sensors in their home, but at the same time want them to be practically invisible. Thanks to the additional holder (not included), you can easily mount the multisensor on a wall or in a suspended ceiling. This means that you can enjoy intelligent functions and parameter monitoring in your home without disturbing the aesthetics of the interior. The additional casing provides an elegant appearance while enabling full use of the functionality. Specification:

Communication protocol: ZigBee 3.0

Maximum RF output power: 6 ± 1dBm

Wireless range: <30 m open area, 10 m with obstacles

Detection angle: 120°

Detection range humidity ci: 20-80% RH

Temperature detection range: -10 - + 60 ° C

Lighting detection range: 0 - 1000 lux

Power supply: 2x CR123A 3V batteries or micro USB 5V 750mA (batteries and ceiling mounting adapter not included in the set)

battery life: up to 2 years (depending on the refresh time setting)

Mounting: screws or 3M adhesive tape

Height Installation height: 2.2 - 2.8 m, recommended height 2.5 m Operating temperature: -0°C to +40°C Operating humidity: maximum 85% Protection level: IP20

Dimensions: 55 x 55 x 35 mm

Included:

PIR presence motion sensor

USB cable

Mounting bracket

2 x screw

Adjustable magnetic base

Double-sided tape

Instruction

Code Product: T650