Transmitter FlySky Paladin PL18 + Ftr10/Ftr16S receiver

FlySky Paladin PL18 transmitter + Ftr10/Ftr16S receiver set.

Ensure your comfort while controlling drones, fixed-wing aircraft, gliders and rotorcraft and bet on a FlySky kit! The PL18 transmitter operates at 2.4G frequency and offers up to 18 channels. An easy-to-read display provides the most important information about the device's operation. The transmitter is distinguished by its wide compatibility and 3G FRM301 RF module. It provides a resolution of up to 4096, and the linear error does not exceed 0.15%. It supports various RF communication protocols and guarantees reliable stability. Also noteworthy are its long range (up to 3 km) and specially designed handle. The kit also includes two receivers - Ftr10 and Ftr16S, which operate in the 2.4GHz band.

Upgraded RF technology

A 3G FRM301 module is built into the PL18 transmitter, which makes it stand out for its great compatibility with a variety of RF protocols. What's more, the device supports the AFHDS 3 3G RF FRM303 module with a transmitting power of up to 2 watts no matter where it is used - even in the mountains or by the sea. And that's still not all! It also supports the CRSF2 protocol and is compatible with the CRSF RF module. As a result, you will gain feedback on flight control parameters.

Ibus2 GPS display

Enjoy convenient access to vital information about the operation of your equipment. The PL18 is equipped with an Ibus2 GPS display (HVGA 3.5 TFT, 320 x 480), which shows the location of supported equipment using graphical parameters so that you can monitor the exact operating status of your drone, glider or other device in real time and use the data for precise control.

Wide compatibility

The FlySky transmitter is highly compatible and can be connected to FlySky AFHDS 2A and AFHDS 3G, among others. In addition, the PL18 automatically searches for related receivers and connects to them, saving you time. This way, when controlling, you can fully focus on the flight. What's more, the transmitter offers wireless dual receiver channel extension, free wiring and dual security. Together with the power module, it can act as a redundant receiver, and in high-speed serial port mode the latency is less than 5 ms.

Efficient power supply

The transmitter is equipped with a 4,300 mAh battery that allows up to 8 hours of operation on a single charge. You can renew the device's energy in two ways. When you charge it wired, using the micro USB interface - it will be ready to continue working in about 6 hours. On the other hand, the time it takes to charge wirelessly is about 7 hours

Ftr10 and Ftr16S receivers

The Ftr10 and Ftr16S are dual antenna receivers that operate at a frequency of 2.4 GHz. They stand out with a range of up to 3,500 meters in the air. They are designed for FS-PL18, FRM301 and FRM302 transmitters.

Included:

PL18 transmitter x1

Ftr10 receiver x1

Ftr16S receiver x1

Micro USB cable x1

Switch set x2

Sunshield x1

User manual x1

Manufacturer

FlySky

Transmitter model

PL18

Channels

18

Compatibility

Fixed-wing aircraft, helicopters, cross-country machines, engineering vehicles

Wireless frequency (RF)

2.4G

RF power

20 dBm (max.)

2.4GHz protocol

AFHDS3

Distance

up to 3 km

Channel resolution

4096

Battery

1S (3.7V) / 4300mAh (built-in)

Charging interface

Micro USB / wireless charging

Charging time

wired charging: 6h (5V) / wireless charging: 7h (2A)

Working time

up to 8h

Low voltage warning

< 3.7V

Antenna type

Dual

Display

HVGA 3.5 TFT, 320 x 480

Language

Chinese and English

Simulator

USB

Data interface

USB, custom interface (USART), PHJACK (PPM)

Operating temperature

-10°C to 60°C

Humidity range

20% to 95%

Online update

Yes

Transmitter color

Black

Dimensions (length x width x height)

214 x 86.5 x 192 mm

Weight of the body

946 g

Certifications

CE, FCC ID: N4ZFT1800, RCM

Receiver model

Ftr10

Compatibility

FS-PL18, FRM301, FRM302

Number of PWM channels

10

Wireless frequency

2.4GHz

Wireless protocol

AFHDS 3

Range

up to 3500 m (air)

Antenna type

Dual (103 mm x2)

Power

3.5-12V

RSSI

Supported

Output signal

PWM / PPM / i.bus / s.bus / UART

Operating temperature

From -10℃ to 60℃

Humidity range

20% to 95%

Online update

Yes

Dimensions

52 x 28 x 22 mm

Weight

22 g

Certifications

CE, RCM, FCC ID: N4ZFtr1000

Receiver model

Ftr16S

Compatibility

FS-PL18, FRM301, FRM302

PWM channels

None

Wireless network frequency

2.4GHz

Wireless protocol

AFHDS 3

Range

up to 3500 m (air)

Antenna type

Dual (92.5 mm x2)

Power

3.5-8.4V

RSSI

Supported

Output signal

i.bus / s.bus / PPM

Operating temperature

From -10℃ to 60℃

Humidity range

20% to 95%

Online update

Yes

Dimensions

20 x 12 x 3.1 mm

Weight

2 g

Certifications

CE, RCM, FCC ID: N4ZFtr16S00