

The SMART-HUB-PLUS controller is the main device of the BE WAVE system; Wireless: ABAX2 : 868.0 MHz ... 868.6 MHz, WiFi : 2.4 GHz, 5 GHz, 4G LTE, 2G GSM ; Events memory: 5000 ; Number of supported devices: 128 ; Number of users: 50 ; Memory card slot: microSD ; SIM card slot: Dual SIM ; Main features: Configuration using the BE WAVE application, Remote control and management, SMS/CliP/PUSH personal messaging, Setting scenarios, Dual Path Reporting ; Power supply: 230 V AC, 18650 battery Li-Ion 3.6 V / 3200 mAh ;
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Application:
BE WAVE system
Port LAN:
1 x Ethernet RJ45
Wireless:
ABAX2 : 868.0 MHz ... 868.6 MHz, WiFi : 2.4 GHz IEEE 802.11 b/g/n, 5 GHz IEEE 802.11 a/n, 4G LTE, 2G GSM
Radio communication range (at open area):
ABAX2 : < 1100 m
LED indicators:
System / Status
Events memory:
5000
Number of supported devices:
128
Number of users:
50
Memory card slot:
microSD - 32 GB included
SIM card slot:
2 x ( Dual SIM )
Mobile phones support:
The free application on Android The free application on iOS
Main features:
Configuration using the BE WAVE application, Remote control and management, WiFi - local access Bi-directional encrypted radio communication : AES-128 Transmission channel diversity – automatic selection of the one of 4 channels that will enable transmission without interference with other signals in the 868 MHz frequency band Independent radio channel for image reception SMS/CliP/PUSH personal messaging, Setting scenarios, Reporting events to two monitoring stations Supported formats: Contact ID IP, SIA IP Dual Path Reporting Communication via Ethernet network The built-in mobile phone module with 2 SIM slots (SMS, monitoring to the station, mobile application, PUSH messaging) - data transmission in 4G LTE / 2G GSM technology - depending on the capabilities of the cellular network Software update via network The "ECO" option allows to extend the battery life up to four times (only in ABAX2) Battery charging possible Battery voltage control Monitoring the status of the battery Low battery level alarm Possibility to mount to the wall Tamper protection (detection of removing from mounting surface and enclosure opening) Power cord - included
Housing:
Plastic
Color:
White
Environmental class EN 50130-5:
II
Power supply:
230 V AC @ 50 Hz, 18650 battery Li-Ion 3.6 V / 3200 mAh - Emergency Power Supply
Power consumption:
max. 2.8 W (operation) 1.85 W (Standby mode)
Battery lifetime:
≤ 8 years - ECO mode
Operation temp:
-10 °C ... 55 °C
Permissible relative humidity:
max. 93 % ± 3 %
Weight:
0.328 kg
Dimensions:
158 x 158 x 30 mm
Manufacturer / Brand:
SATEL
Guarantee:
2 years
Sinu ülevaate hindamise saatmine ebaõnnestus
Teavita sobimatust kommentaarist
Teavitus on saadetud
Sinu teavitust ei saa saata
Kirjutage oma ülevaade
Ülevaade on saadetud
Sinu ülevaadet ei saa saata
The SMART-HUB-PLUS controller is the main device of the BE WAVE system; Wireless: ABAX2 : 868.0 MHz ... 868.6 MHz, WiFi : 2.4 GHz, 5 GHz, 4G LTE, 2G GSM ; Events memory: 5000 ; Number of supported devices: 128 ; Number of users: 50 ; Memory card slot: microSD ; SIM card slot: Dual SIM ; Main features: Configuration using the BE WAVE application, Remote control and management, SMS/CliP/PUSH personal messaging, Setting scenarios, Dual Path Reporting ; Power supply: 230 V AC, 18650 battery Li-Ion 3.6 V / 3200 mAh ;
check_circle
check_circle