TUYA WiFi DUAL smoke and carbon monoxide detector

TUYA WiFi carbon monoxide and smoke detector

A modern, technologically advanced carbon monoxide detector with a loud sound siren, traffic lights and the option to connect to WiFi to the TUYA application.

Control of status and threat notifications in any location. Be informed about the threat in advance.

The device has a self-test mechanism. It is recommended to test the device once every two months. Self-diagnosis can be performed from the application or by pressing the device button.

In addition to the classic function of a local siren and alarm sensor, the device has a built-in processor and Wi-Fi connectivity. After detecting a threat, the device starts local alarming with a loud siren (actual 85dB), lighting and sends an alarm to the application on your phone. You will receive this important message wherever you are.

Main advantages

Works with the TUYA application

Connects via WiFi and does not need additional communication gateways

Low profile, aesthetic appearance

Long battery life

High quality of workmanship

Sensitive latest generation sensors

Meets the standard: EN14604-2005/AC2008

Meets the standard : EN50291:2010

Exceeding the level of carbon monoxide is signaled by sound and light signals indicating the detection of a threat.

When carbon monoxide is detected, the sensor turns on the alarm siren and visual signals and generates a notification in the application on the mobile phone.

The detector is recommended to be installed in a relatively high position, because carbon monoxide accumulates near the ceiling.

Carbon monoxide, commonly called carbon monoxide, is a highly poisonous gas, colorless and odorless, slightly lighter than air, which means it easily mixes with it and spreads in it, collecting in the upper part of the room.

\ n

Device dimensions

Specification:

power supply: 2x 1.5V DC AA batteries (Not included)

CO detection sensitivity: 50ppm- 60-90 minutes , 100ppm- 10-40 minutes, 300ppm- <3 minutes

Current consumption during alarm: <30mA

Meets the standard: EN14604-2005/AC2008

Meets the standard: EN50291:2010

Standby current consumption: <10uA

alarm sound signaling: (85dB)

optical alarm signaling

Frequency: WiFi b/g/n 2.4 GHz

Infrared photoelectric sensor

Included:

\ nProfessional WiFi carbon monoxide smoke detector

Mounting pins

Instruction

Packaging

Product code: SNT035